Brick Cleaning Services

From Pressure washing to acid washing, we clean all types of brick work safely and bring them back to life.

We start from £1 per square metre but this really depends on the contamination and state of the bricks to be cleaned, we provide a clear quotation on inspection.

Aesthetically pleasing, safer to walk on no slips or falls on brick paved areas for your staff or customers.

Restoring the fresh appearance of brickwork is a specialty at CCWC Services. Here’s how we rejuvenate brick:

1. Thorough Cleaning: We start with a deep clean using techniques such as pressure washing or steam cleaning, which effectively remove dirt, grime, and other build-ups from the brick surface.
2. Mortar Repair: If necessary, we repair the mortar joints. Repointing old or damaged mortar can significantly improve the overall look of the brickwork.
3. Stain Removal: Specialized cleaning agents are used to remove tough stains like efflorescence, rust, or water marks.
4. Gentle Techniques for Older Brick: For historic buildings, we use gentle methods like Doff steam cleaning to clean without damaging the brick.
5. Sealing: Once clean and dry, applying a sealant can help protect the brick from future dirt and damage, enhancing its appearance and longevity.
6. Regular Maintenance: We advise on and can provide regular maintenance to keep the brick looking its best.

Before pressure washing brick surfaces, it’s important to follow these steps:

1. Inspect the Brick: Examine the brick for any loose or damaged mortar, cracks, or other issues that might worsen with pressure washing. Repair any problems before proceeding.
2. Remove Loose Debris: Sweep away loose dirt, leaves, and debris from the brick surface. This prevents clogs in the pressure washer nozzle.
3. Apply Cleaning Solution: Depending on the type of dirt or staining, you may apply a specialized brick cleaning solution. Allow it to sit for a recommended duration to loosen dirt and stains.
4. Use Low Pressure: Start pressure washing with a low-pressure setting to avoid damaging the brick. Gradually increase pressure as needed.
5. Keep a Safe Distance: Maintain an appropriate distance between the pressure washer nozzle and the brick surface to prevent damage.
6. Work Methodically: Clean the brick systematically, moving from top to bottom and ensuring even coverage.
7. Rinse Thoroughly: After pressure washing, thoroughly rinse the brick to remove any cleaning solution residue.
8. Seal the Brick: Consider applying a brick sealant after cleaning to protect it from future stains and damage.

Brick cleaning can be suitable for a wide range of brick types, but it’s essential to consider the condition, age, and characteristics of the brickwork. Here’s a general guideline:

• New Brickwork: Newer, well-maintained brickwork can often withstand standard cleaning methods like pressure washing or steam cleaning.
• Old or Fragile Brickwork: Older or more delicate bricks, especially in historic buildings, may require a gentler approach. Techniques like Doff steam cleaning, which uses lower pressure and temperature, are ideal for preserving the integrity of older bricks.
• Specialized Brick Surfaces: Some types of brick, such as glazed or decorative bricks, may require specialized cleaning solutions and techniques to avoid damage.
• Stained or Discolored Bricks: Stains, efflorescence, or discoloration on bricks can often be effectively removed through professional brick cleaning.

At CCWC Services, we assess the specific type and condition of your brickwork before recommending a suitable cleaning method. Our goal is to restore the beauty of your brick while ensuring its longevity and structural integrity. We have the expertise and experience to work on various brick surfaces, including those in historic or sensitive settings.**

The duration of the brick cleaning process can vary depending on several factors, including the size of the area, the level of soiling, the type of cleaning method used, and weather conditions. Here’s a general guideline:

• Small Areas: Cleaning a small section of brickwork, such as a single wall or a small facade, can usually be completed in a few hours to half a day.
• Medium-Sized Areas: For medium-sized areas like the front of a house or a moderate-sized building, the process may take a full day or slightly longer.
• Large Projects: Cleaning large commercial buildings or extensive brick surfaces may require several days or even weeks to complete, depending on the complexity and size of the project.
• Drying Time: After cleaning, the brickwork needs time to dry. This can take anywhere from a few hours to a day or more, depending on weather conditions and the cleaning method used.

It’s important to note that our priority at CCWC Services is to deliver high-quality results rather than rush through a project. We assess each job individually and provide a detailed estimate of the time required. Our goal is to ensure that the brick cleaning process is completed efficiently while achieving the best possible outcome for your brickwork.**

Yes, at CCWC Services, we are committed to environmentally responsible cleaning practices. We offer eco-friendly brick cleaning solutions that are safe for both your brickwork and the environment. Here’s how we prioritize eco-friendliness:

• Biodegradable Cleaners: We use biodegradable cleaning agents that break down naturally, reducing harm to the environment.
• Water Conservation: Our equipment is designed for water efficiency, minimizing water usage during the cleaning process.
• Safe Disposal: We ensure that any wastewater and cleaning residues are disposed of in an environmentally responsible manner, in compliance with local regulations.
• Low-Impact Methods: Our team employs cleaning methods that have a minimal impact on surrounding ecosystems and wildlife.

By choosing our eco-friendly brick cleaning solutions, you not only rejuvenate your brickwork but also contribute to a more sustainable future. We are dedicated to providing effective cleaning services that prioritize both your needs and the well-being of our planet.**

Yes, at CCWC Services, we specialize in graffiti and paint removal from brick surfaces. Here’s how we tackle these challenges:

• Graffiti Removal: We use effective and safe graffiti removal techniques that won’t harm your brickwork. This includes using specialized cleaning agents and equipment to gently lift graffiti without damaging the bricks.
• Paint Removal: Whether it’s accidental paint splatters or deliberate paint vandalism, our team can remove paint from brick surfaces. We assess the type of paint and the condition of the bricks to determine the most suitable removal method.

Our goal is not only to remove graffiti and paint but also to restore the natural beauty of your brickwork. We have the expertise and experience to handle these situations efficiently, leaving your bricks looking clean and pristine.**

Absolutely, at CCWC Services, we provide comprehensive brick cleaning services for both interior and exterior brick surfaces. Here’s how we approach each:

• Interior Brick: We understand that interior brick surfaces require a different level of care. Whether it’s a fireplace, accent wall, or other interior feature, we use gentle cleaning methods to maintain the beauty of indoor bricks without causing damage.
• Exterior Brick: Exterior brick surfaces often face more exposure to the elements and environmental factors. Our team is equipped to handle exterior brick cleaning, removing dirt, grime, staining, and even graffiti to restore the brick’s original appearance.

Our tailored approach ensures that your interior and exterior brick surfaces are treated with the appropriate cleaning methods, enhancing their aesthetic appeal and longevity.**